Industrial Glue Gun – 300 Watts
- Trigger-fed glue and uses 11MM diameter glue sticks.
- 300w power
- Easy to use; simply insert glue stick into the chamber and pull the trigger to advance glue.
- They're ultra-safe because of a built-in safety fuse that shuts the gun down automatically if they overheat.
- power cord length : 100cm
- Material : high temperature insulating plastic
DIY Glue Gun – 20 watts Pink
- Trigger-fed glue and uses 7MM diameter glue sticks.
- 20w power
- Easy to use; simply insert glue stick into the chamber and pull the trigger to advance glue.
- They're ultra-safe because of a built-in safety fuse that shuts the gun down automatically if they overheat.
- power cord length : 100cm
- Material : high temperature insulating plastic
Hot Glue Gun – 20 watts Blue
- Trigger-fed glue and uses 7MM diameter glue sticks.
- 20w power
- Easy to use; simply insert glue stick into the chamber and pull the trigger to advance glue.
- They're ultra-safe because of a built-in safety fuse that shuts the gun down automatically if they overheat.
- power cord length : 100cm
- Material : high temperature insulating plastic
Hot Melt Glue Sticks – 11mm
Pastel Pad 4 colours Signature 180gsm 12 Sheet A5
- Â colours; cream, gold, green and pink
- 180gsm
- 12 Sheets which are tape bound
- 2mm (0.08in) thick backing board
- Practical tips on the inside cover
- Available in A3, A4 and A5
- Mont Marte Charcoal Products
- Mont Marte Graphite Products
- Mont Marte Coloured Pencils
- Mont Marte Pastel Pencils
- Mont Marte Skin Tints
- Mont Marte Soft Pastels
- Mont Marte Oil Pastels
Make n Bake Polymer Clay Signature 60g – Metallic Green
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Make n Bake Polymer Clay Signature 60g – Metallic Blue
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Make n Bake Polymer Clay Signature 60g – Metallic Mauve
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Make n Bake Polymer Clay Signature 60g – Metallic Pink
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Make n Bake Polymer Clay Signature 60g – Metallic Red
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Make n Bake Polymer Clay Signature 60g- Chrome
- Available in a range of bright colours
- Soft and smooth, makes it easy to knead, blend colours and join edges
- Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
- Ideal for press moulds, pattern making, canes, beading jewellery
- Once cured can be drilled, sanded, cut
- Compact 60 g size great for adding many colours to your collection
- Non toxic
Directions:
- Knead until smooth
- Create your sculpture
- Preheat oven to 120-130 degrees c and bake for 30 mins
- Carefully remove from oven and let it cool
Handy Hints:
- Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
- Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
- Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
- Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
- Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
- Do not use a microwave with polymer clay
- Hardened clay will accept additional layers of clay over it and can be re-baked
- Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
- Keep packaging for future reference
Techniques:
- Mica Shift
- Skinner Blend
- Mokume Gane
Gloss Clay Varnish Signature 120ml
- Seals, protects and strengthens clay
- Suitable for polymer or air hardening clay
- Dries to a hard transparent, high gloss finish
- Water-proof formula great for DIY plant pots and more
- Enhances paint colour underneath and surface appearance
Directions:
- Apply varnish in thin layers using a soft taklon brush, allowing approx. 30mins to dry between applications
- Note: may have a slight tacky touch on polymer projects due to plasticiser in clay
