Art Rangers Tempera Paint 500mls &#8211; Sea Blue

Spray Paint – Bright Chrome

CRAFTS & DIY ACCESSORIES, SPRAY PAINTS

KSh380.00

Power Eagle Spray Paint bright chrome is a kind of Quick-drying thermoplastic acid. Easy to operate, with good atomization and sufficient spray. The paint coating is quick drying hard, thick and has an excellent luster adhesion, toughness and shock-resistance. Colors are good for decoration, with protecting fiction. Widely used for protecting decoration of the surfaces of metal, glass and ABS plastics. Do not use near heat and store in a cool place below 45 degrees. Also use in ventilated area and protect near by objects from the over spray.

Add to cart

Pastel Pad 4 colours Signature 180gsm 12 Sheet A5

CRAFTS & DIY ACCESSORIES, Pencil Art

KSh250.00

colours; cream, gold, green and pink
180gsm
12 Sheets which are tape bound
2mm (0.08in) thick backing board
Practical tips on the inside cover
Available in A3, A4 and A5

SUITABLE FOR USE WITH

Mont Marte Charcoal Products
Mont Marte Graphite Products
Mont Marte Coloured Pencils
Mont Marte Pastel Pencils
Mont Marte Skin Tints
Mont Marte Soft Pastels
Mont Marte Oil Pastels

Add to cart

Make n Bake Polymer Clay Signature 60g – Metallic Green

KSh300.00

Available in a range of bright colours
Soft and smooth, makes it easy to knead, blend colours and join edges
Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
Ideal for press moulds, pattern making, canes, beading jewellery
Once cured can be drilled, sanded, cut
Compact 60 g size great for adding many colours to your collection
Non toxic

Directions:

Knead until smooth
Create your sculpture
Preheat oven to 120-130 degrees c and bake for 30 mins
Carefully remove from oven and let it cool

Handy Hints:

Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
Do not use a microwave with polymer clay
Hardened clay will accept additional layers of clay over it and can be re-baked
Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
Keep packaging for future reference

Techniques:

Mica Shift
Skinner Blend
Mokume Gane

Add to cart

Make n Bake Polymer Clay Signature 60g – Metallic Blue

KSh300.00

Available in a range of bright colours
Soft and smooth, makes it easy to knead, blend colours and join edges
Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
Ideal for press moulds, pattern making, canes, beading jewellery
Once cured can be drilled, sanded, cut
Compact 60 g size great for adding many colours to your collection
Non toxic

Directions:

Knead until smooth
Create your sculpture
Preheat oven to 120-130 degrees c and bake for 30 mins
Carefully remove from oven and let it cool

Handy Hints:

Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
Do not use a microwave with polymer clay
Hardened clay will accept additional layers of clay over it and can be re-baked
Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
Keep packaging for future reference

Techniques:

Mica Shift
Skinner Blend
Mokume Gane

Add to cart

Make n Bake Polymer Clay Signature 60g – Metallic Mauve

KSh300.00

Available in a range of bright colours
Soft and smooth, makes it easy to knead, blend colours and join edges
Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
Ideal for press moulds, pattern making, canes, beading jewellery
Once cured can be drilled, sanded, cut
Compact 60 g size great for adding many colours to your collection
Non toxic

Directions:

Knead until smooth
Create your sculpture
Preheat oven to 120-130 degrees c and bake for 30 mins
Carefully remove from oven and let it cool

Handy Hints:

Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
Do not use a microwave with polymer clay
Hardened clay will accept additional layers of clay over it and can be re-baked
Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
Keep packaging for future reference

Techniques:

Mica Shift
Skinner Blend
Mokume Gane

Add to cart

Make n Bake Polymer Clay Signature 60g – Metallic Red

KSh300.00

Available in a range of bright colours
Soft and smooth, makes it easy to knead, blend colours and join edges
Very good shape stability and minimal shrinkage so your sculpture maintains original shape and size once cured
Ideal for press moulds, pattern making, canes, beading jewellery
Once cured can be drilled, sanded, cut
Compact 60 g size great for adding many colours to your collection
Non toxic

Directions:

Knead until smooth
Create your sculpture
Preheat oven to 120-130 degrees c and bake for 30 mins
Carefully remove from oven and let it cool

Handy Hints:

Wash any dirt and oils off hands, surfaces and tools with dishwashing liquid to prep for sculpting
Prepare clay by kneading until smooth and pliable, can be shaped with tools or press moulds
Baking times may vary. In general, allow 30 mins of baking time for every 6mm of thickness - test run recommended
Under normal baking at the correct temperature may generate a small amount of fumes. Baking at higher than recommended temperatures can cause increased fumes and should be avoided (all fumes are non-toxic)
Place onto a foil sheet or ceramic tile (to diffuse and spread heat evenly) and into centre of household oven preheated to 120 - 130 degrees C (248 - 266 degrees F) and bake for 30 mins
Do not use a microwave with polymer clay
Hardened clay will accept additional layers of clay over it and can be re-baked
Keep your unused clay fresh in cling film and store in airtight container - in a cool, dry place
Keep packaging for future reference

Techniques:

Mica Shift
Skinner Blend
Mokume Gane

Add to cart

Modelling Tools Signature 6pc

Clay Tool Kits, CRAFTS & DIY ACCESSORIES

KSh700.00

These signature modelling tools provide precision and versatility for clay sculpting, pottery, resin art, and DIY crafts. The large triangular tool defines wide inclined areas, while the flat round end shapes and positions features. Use the sharp angled ribbon tool for carving hard-to-reach places and the wooden tool end for fine incisions. The curved ribbon blade creates uniform indentations, and the wide flat paddle tool levels surfaces. With various ribbon and wooden ends, these tools allow for shaping, smoothing, carving, and texturing with ease. Perfect for artists and hobbyists!

Add to cart

Air Hardening Modelling Clay Premium 500g- White

Modelling Clay - Air Dry, CRAFTS & DIY ACCESSORIES

KSh450.00

Mold breathtaking art with 500g White Air Hardening Modelling Clay from Sayari Crafters in Nairobi! This smooth, pliable Air Hardening Modelling Clay is perfect for sculpting elegant pottery, ornaments, or school projects, drying to a hard finish in 24 hours without a kiln. Ideal for artists, students, and hobbyists. Order now for free delivery in Nairobi on orders above KSh 8,000. Contact Sayari Crafters at +254 726 493 597 to get your Air Hardening Modelling Clay and create vibrant masterpieces!

Add to cart